TER Ceska
Flex EX 4, Flex EX 6
Instruction manual
14. Appendix # 1: Rechargeable battery kit – Operating instructions
Kit is designed to replace the standard batteries AA (LR06) with pack of rechargeable batteries that can be recharged directly
in the transmitter. Discharged batteries are not putting out, and thus simplifies the operation. In the reserve you always have
a second battery pack. The kit allows to charge two battery packs at the same time. The charger is equipped with optical
indication during charging and can supply either AC adapter or cigarette adapter in the vehicle. The set is designed for all
radio remote controls Flex EX series.
Contents:
2 pieces of rechargeable battery packs, charger and AC power adapter.
14.1. Installation
Insert the battery pack onto the transmitter (refer to Fig. 7).
14.2. Charging
1. When the charger unit is initially powered on, both LEDs „A” and „B” will blink green 2 – 3 times (charger unit is in
good order) and then off (standby mode) (refer to Fig. 8 on page 27).
2. Plug the charging cable (output „A” or „B”) into the battery pack charging input slot (refer to Fig. 7).
3. When the charging cable is plugged in, the designed status LED will fast blinks (charging in process).
4. When charging is completed, a constant green light is displayed on either LED „A” or LED „B”.
5. When charging cable is unplugged, the designed status LED is turned off (standby mode).
6. Total charging time is approximately 1.5 to 2 hours.
7. Use only factory-equipped AC power adapter.
8. By charging follow all the rules in chapter 3.8 BATTERY CHARGING on page 6.
14.3. Replacing of the internal Ni-MH cells
For replacing please contact the TER Ceska Company.
14.4. Specifications of rechargeable battery kit
AC adapter:____________________________________230 VAC / 12 VDC, 1,0 A
Power consumption:_____________________________15 VA
Charger:_______________________________________electronic, 2 outputs, optical indication
Charger Supply Voltage___________________________12 – 24 VDC
Battery pack:___________________________________rechargeable Ni-MH 2,4 V / 1000 mAh, 2 cells,
thermal fuse
Page 26 of 27
December 2015
Fig. 7: Installation of the battery pack and connection to the charger
