TER Ceska
Flex EX 4, Flex EX 6
Instruction manual
9.9. 3
rd
Speed Push Button Operating Procedure
When a push button is held at 2
nd
speed, pressing the 3
rd
speed push button one time will activate the 3
rd
speed output relay
(toggled). If the operator wants 2
nd
speed again, just press the 3
rd
speed push button one more time.
9.10. Magnet ON/OFF Push Button Function
To activate the magnet just press the push button with the Magnet symbol. To deactivate the magnet, for safety purpose, you
must first press and hold the Magnet push button and then press the OFF push button. Pressing the OFF push button by itself
can not deactivate the magnet.
9.11. Auxiliary STOP Push Button Function
The auxiliary STOP function acts as a 2
nd
emergency stop button. Other than by emergency stop button and transmitter power
key switch, the receiver MAIN is also deactivated when this auxiliary stop push button is pressed.
9.12. Automatic Channel Scanning Operating Procedure
After changing the transmitter channel (refer to page 10), turn on the transmitter power, rotate the power key switch to the
„Start“ position, and hold it there for up to 1 minute. Within this 1-minute period the receiver will search (channel 01 –
channel 62) and lock onto the newly selected transmitter channel automatically. Please note that in order for the receiver to
switch to auto-scanning mode, you must first deactivate the receiver MAIN by shutting off the transmitter power or press
down the emergency stop button before changing the transmitter channel.
Page 19 of 27
December 2015
