Magliner LiftPlus, Руководство по обслуживанию

Страница: 24 / 40

1-800-MAGLINE (624-5463)
Lift Plus
®
24
LOWER LIMIT SWITCH
TOOLS NEEDED: #1 PHILLIPS SCREWDRIVER, BLUE THREAD LOCKER
Removal:
1. Turn power switch off and remove the battery.
2. Remove the battery box.
3. Remove the screws fastening the lower limit switch using a #1 Phillips driver.
4. Slide the wire connectors off of the lower limit switch terminals.
Installation:
1. Slide the Blue wire connector onto the Lower Limit Switch terminal labeled “NO”.
2. Slide the Orange wire connector onto the Lower Limit Switch terminal labeled “Com”.
3. Slide the orange with white stripe wire connector onto the lower limit switch terminal labeled “NC”.
4. Coat the threads of two #4-40 X .5” long Phillips machine screws with blue thread locker.
5. Place the lower limit switch against the column so that the roller on the switch lever is to the right and below the
rest of the switch.
6. Fasten the lower limit switch to the column using the two screws. NOTE: Do not over tighten the screws.
7. Install the battery box and the battery.
8. Unfold and lock the LiftPlus.
Item Qty. Part Number
A Limit switch (upper and lower) 2 62067
Wiring harness for upper limit switch:
B
48” models 1 534401
60” models 1 534405
72” models 1 534406
C Wiring harness for lower limit switch 1 534402
A
A
B
C