Magliner LiftPlus, Руководство по обслуживанию

Страница: 23 / 40

1-800-MAGLINE (624-5463)
Lift Plus
®
23
CIRCUIT BREAKER
TOOLS NEEDED: WIRE CUTTERS (removal only)
Removal:
1. Turn off the LiftPlus.
2. Fold the LiftPlus.
3. Remove the battery cover and disconnect the battery.
4. Slide the wire connectors off of the circuit breaker terminals.
5. Clip the circuit breaker retaining ring with a pair of wire cutters.
6. Remove the circuit breaker.
Installation:
1. Push the circuit breaker through the hole in the top of the battery compartment.
2. Be sure that the bezel of the circuit breaker is flush with the top of the battery compartment. You may need to
reorient it in the hole.
3. Place a new retaining ring loosely around the circuit breaker.
4. Slide the wire connectors onto the circuit breaker terminals in any order.
5. Slide the retaining ring up until the circuit
6. Breaker is secure.
7. Reconnect the battery unless further work on the electrical system is planned.
BATTERY BOX
TOOLS NEEDED: LARGE FLAT SCREWDRIVER
Removal:
1. Turn off the LiftPlus and remove the battery
2. Remove the battery box by pushing up from below. It may be necessary to pry at the upper lip with a large
flat-blade screwdriver.
Installation:
1. Push battery box into place, being certain that the slots cut into one of the underside edges are facing toward
the top of the LiftPlus.
2. Install the battery.