![background image](http://html2.mh-extra.com/html/magliner/liftplus/liftplus_maintenance-manual_3511915021.webp)
1-800-MAGLINE
(624-5463)
Lift
Plus
®
21
1
2
Adjusting the Brake Calipers
The brake calipers can be adjusted using a 3/16” hex screwdriver. The brake caliper screws are
accessed between the wheel spokes on either side.
1. Adjust the brake cable mount to its highest position as described in the preceding section
(Adjusting the Brake Cable Tension).
2. Turn the brake caliper screw clockwise as far as it will go without excessive force.
3. Back both screws off one half turn in the opposite direction.
4. To test the caliper adjustment, push the unit around while not engaging the brakes. If you
feel that either brake is dragging too much, try backing out the screw another 1/8 of a turn
at a time until the unit rolls freely.
Note:
It is normal for the brakes to rub slightly, but they
should not drag enough to interfere with easy rolling of the unit.
5. Perform the full brake cable tension adjustment as described in the previous section.
Содержание LiftPlus
Страница 37: ...1 800 MAGLINE 624 5463 LiftPlus 37...
Страница 38: ...1 800 MAGLINE 624 5463 LiftPlus 38...
Страница 39: ...1 800 MAGLINE 624 5463 LiftPlus 39...