Magiglo ARIA, Инструкция для пользователя, установки и обслуживания

Страница: 45 / 56

Page 41
4.3.
20B
Replacing Parts
For any spare parts that are required, please contact either your supplier or the manufacturer
directly. You will need the model name i.e. model number, the gas type, the type of control
and serial number.
Only approved parts should be used.
After replacing any components, fit the fire tray into the firebox, remake the gas connection
and follow the commissioning instructions in this booklet. Always carry out a gas soundness
check on all gas joints broken during replacement of parts.
Follow instructions under ‘Servicing Instructions’ to remove the burner tray from the firebox.
Place the ceramic fibre burner board in a safe place to prevent damage.
4.3.1.
56B
Fire Back Replacement
1. Remove the trim by lifting it off and away
from the appliance.
2. Remove all the fuel effect from the
firebed.
3. Remove all the small screws from
around the black fireback retaining trim
using a No. 1 posidrive screwdriver.
4. Remove the black trim.
5. Lift out the old/damaged fireback and
replace with new one, ensuring that the
fibre seal remains intact.
6. Refit in reverse order.