Magiglo ARIA, Инструкция для пользователя, установки и обслуживания

Страница: 20 / 56

Page 16
7. Now place 5 more Random Coals on
top of the Small Square Coals as shown
in figure below ensuring that they are
stable in position and do not topple over
onto the burner or to the front. Place
them such that the flat surfaces are at
the top and bottom.
8. The next step is to place further 6
Random Coals in such a way that they
are bridging between the front coals and
the coals placed in step
X
1
X
. Leave gaps
between coals. Ensure that none of the
coals fall onto the burner. See
X
Figure
27
X
for the layout.
9. Finally place 3 (for 16”) or 4 (for 18”)
Random Coals at the back ensuring that
the gaps left previously in step
X
1
X
are not
blocked by the coals.
10. Packing the coals too tightly together will
result in a poor flame picture. The best
results come from a ‘loose’ fuel build.
11. After the appliance has been allowed to
warm up (operated on high setting for
10-15 minutes), small adjustments (using
a small pair of tongs) may be made to
the top layer to achieve the desired
flame picture.
12. It is recommended that the coals be left
alone once the desired flame picture has
been achieved. Constant moving of the
coals causes the coals to disintegrate
and/or cause discolouration.
WARNING: Do not touch the
fire when it is alight. The fire
will remain very hot for a while
after extinguishing.
Small random
coals
Figure 26
GAPS
Random
coals
Figure 27
Random
coals
Figure 28