Magiglo ARIA, Инструкция для пользователя, установки и обслуживания

Страница: 19 / 56

Page 15
2.5.1.
31B
Coal Effect Layout
This fire is supplied with three different types
of ceramic coals packed in separate bags as
follows: -
16” 18”
Random Coals 19 21
Small Square Coals 6 8
Medium Square Coals 4 5
(Quantities shown are pcs)
Proceed with the coal layout as follows: -
1. Unpack the bag of
Medium Square
Coals and place them equally, as far
back as possible on the matrix. Refer to
X
Figure 23
X
.
2. Now unpack the large bag containing
Random Coals .
3. For 16”, choose the largest 5 triangular
shaped coals and place 3 coals on the
middle 3 ribs as shown in the figure.
4. For 18”, choose the largest 6 triangular
shaped coals and place 4 coals on the
middle 4 ribs.
5. Place them such that the fronts of the
coals are in line with the front edges of
the ribs. Place the other two coals
similarly on the extreme two ribs
ensuring that they do not fall into the
channels. If necessary support them
against the adjoining coals.
6. Unpack the bag of Small Square Coals
and starting from left hand side press
each coal gently onto the spike
diagonally approximately 15mm into the
tray. Ensure that the flat smooth surface
of the coal is on the top. Also ensure
that none of the holes are blocked. The
coals should be pressed in all the way
and there should be small gaps between
the coals (see
X
Figure 25
X
)
Medium square
coals equally
spaced all
the way
back
Figure 23
Large triangular
random coals
GAPS
RIBS
CHANNELS
Figure 24
Small square coals
Figure 25