Magiglo ARIA, Инструкция для пользователя, установки и обслуживания

Страница: 36 / 56

Page 32
9. Roll up the excess cable and tuck it
away in the corner. DO NOT cut the
excess cable.
10. To further tension the cable, while
gripping the tensioning screw tighten
(turn clockwise) the wing nut. If after
carrying out the above procedure the
seal between the firebox flange and the
fire surround is not adequate repeat the
above procedure.
11. Prepare the gas line for final fixing.
12. Replace the burner tray ensuring that the
injector rail is located into the rear
support bracket in the firebox.
13. Fix the tray using the two tray fixing
screws removed previously.
14. Connect the gas supply to the inlet to the
valve via the isolating valve supplied.
15. For Manual Control models. Proceed to
Section
X
3.8.9
X
. For other control options,
proceed to instructions from those in
Sections
X
3.8.5
X
to
X
3.8.7
X
as applicable.
WING
NUT
THUMB
SCREW
CABLE
TENSIONING
SCREW
Figure 50