Magiglo ARIA, Инструкция для пользователя, установки и обслуживания

Страница: 21 / 56

Page 17
2.5.2.
32B
Pebble Effect Layout
This fire is supplied with different types of
ceramic pebbles packed in separate bags as
follows: -
16” 18”
Large Pebbles (A and B) 8 10
Small Front Pebbles (E and J) 10 13
Medium Flat Pebbles (H) 4 5
Medium Pebbles (C and D) 2 2
Small round Pebbles (F) 4 5
(Quantities shown are pcs)
Proceed with the pebble layout as follows: -
1. Unpack the bag of
Medium Flat
Pebbles and place them equally, as far
back as possible on the matrix. Unpack
the bag of
Small Front Pebbles and
starting from left hand side press each
pebble gently onto the spike diagonally
approximately 15mm into the tray.
Ensure that the flat smooth surface of
the pebble is on the bottom. Also ensure
that none of the holes are blocked. The
pebbles should be pressed in all the way
and there should be small gaps between
the pebbles (see
X
Figure 29
X
).
2. Now unpack the bag containing the
Large Pebbles .
3. For 16” choose 3 pebbles and place
them on the middle 3 ribs as shown in
X
Figure 30
X
.
4. For 18” choose 4 pebbles and place
them on the middle 4 ribs as shown in
X
Figure 30
X
.
5. Place them such that the fronts of the
pebbles are protruding approx. 12mm in
front of the rib edge. Place the two
Medium (C and D) pebbles similarly on
the extreme two ribs ensuring that they
do not fall into the channels. If
necessary support them against the
adjoining pebbles (see
X
Figure 30
X
).
6. Now place 5 (for 16”) or 6 (for 18”) more
Large Pebbles on top of the Small
Front Pebbles as shown in figure below
ensuring that they are stable in position
and do not topple over onto the burner or
to the front. Place them such that the flat
surfaces are at the bottom (see
X
Figure
31
X
).
Figure 29
Figure 30
Figure 31