Hearth and Home Technologies Quadra-Fire EXPEDITIONII-AU Скачать руководство пользователя

Страница: 1 / 26

7095-818

Quadrafire • Expedition II AU Install Manual_Rev B • 2020 - ___ • 09/20

EXPEDITION II AUSTRALIAN

WOOD INSERT

AUTOMATIC COMBUSTION

CONTROL (ACC)

MODEL NUMBER:

EXPEDITIONII-AU

Installation Manual

Installation & Appliance Set-Up

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

NOTICE: DO NOT DISCARD THIS MANUAL

•

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any

other appliance.

•

Do not over fire - If appliance or chimney connector

glows, you are over firing. Over firing will void

your warranty.

•

Comply with all minimum clearances to combustibles

as specified.

Failure to comply may cause house fire.

If the information in these instructions is

not followed exactly, a fire could result

causing property damage, personal injury,

or death.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during

operation AND cool down.

Hot glass and appliance will cause burns.

•  Do not touch glass until it is cooled
•  Use leather gloves when reloading fuel
•  NEVER allow children to touch glass
•  Keep children away
•

CAREFULLY SUPERVISE children in same room

as appliance.

• Alert children and adults to hazards of high

temperatures

• High temperatures may ignite clothing or other

flammable materials.

• Keep clothing, furniture, draperies and other

flammable materials away.

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may over fire and generate

poisonous gases (i.e. carbon monoxide).

WARNING

Содержание Quadra-Fire EXPEDITIONII-AU



























Результаты поиска

Содержание Quadra-Fire EXPEDITIONII-AU

Отзывы:

Похожие инструкции для Quadra-Fire EXPEDITIONII-AU

Бренды по названию

Популярные бренды

Hearth and Home Technologies Quadra-Fire EXPEDITIONII-AU, Руководство по установке

Результаты поиска

Содержание Quadra-Fire EXPEDITIONII-AU

Отзывы:

Похожие инструкции для Quadra-Fire EXPEDITIONII-AU

Бренды по названию

Популярные бренды