background image

7095-818

 1

Quadrafire  •  Expedition II AU Install Manual_Rev B  •  2020 - ___  •  09/20

R

EXPEDITION II AUSTRALIAN 

WOOD INSERT

AUTOMATIC COMBUSTION 

CONTROL (ACC)

MODEL NUMBER:

EXPEDITIONII-AU

Installation Manual

Installation & Appliance Set-Up

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

NOTICE: DO NOT DISCARD THIS MANUAL

• 

Do  not  store  or  use  gasoline  or  other  flammable 

vapors and liquids in the vicinity of this or any 

other appliance.

• 

Do not over fire - If appliance or chimney connector 

glows,  you  are  over  firing.  Over  firing  will  void 

your warranty.

• 

Comply with all minimum clearances to combustibles 

as specified.

Failure to comply may cause house fire.

If the information in these instructions is 

not  followed  exactly,  a  fire  could  result 

causing property damage, personal injury, 

or death.

WARNING

!

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down.

Hot glass and appliance will cause burns.

•  Do not touch glass until it is cooled
•  Use leather gloves when reloading fuel
•  NEVER allow children to touch glass
•  Keep children away
• 

CAREFULLY SUPERVISE children in same room 

as appliance.

•  Alert children and adults to hazards of high 

temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

•  Keep clothing, furniture, draperies and other 

flammable materials away.

WARNING

!

Fire Risk.

For use with solid wood fuel only.

Other  fuels  may  over  fire  and  generate 

poisonous gases (i.e. carbon monoxide).

WARNING

!

Содержание Quadra-Fire EXPEDITIONII-AU



























Отзывы: