10
Troubleshooting
79
Picture not stable when using HDMI to DVI
HDMI audio is switched on, causing instability.
Please check that Settings
Audio HDMI Audio
Out is turned off when using a DVI connection to
your TV.
Problem
Possible causes
Solution
10
Troubleshooting
10.2
Setting the Output Format
from the Front Panel
If you can’t see a picture when you first connect Magic TV™ to your television,
it might be because the default 1080i 50Hz format isn’t recognised. In this
case, you can use the front panel display to change the format to one
supported by your TV.
1. Press
.
2. The front panel should read “Live TV”.
3. Press
until the display reads “Settings”. Press
.
4. The front panel should now read “Info Format”. Press
until the display
reads “Video”. Press
.
5. The front panel should read “TV Aspect”. Press
until the display reads “V
Format”. Press
.
6. Use
/
arrows to select a suitable Output Format.
E.g. “1080i (60Hz)” Press
.
7. The front panel should read “OK / Cancel”.
8. If you can now see a correct image on the TV, press
.
9. If the image still hasn’t appeared, wait a few seconds until the front panel
reverts to the previous resolution e.g. “1080i (50Hz)” then return to step 6
to try another resolution.
79
78
