• Navigate to Settings System Firmware Upgrade
• Magic TV™ will search online for a new version of the firmware
(if connected to the internet) and then look on any connected USB drives.
If the correct files are found it will say either “New Internet firmware found!”
or “New USB firmware found!”
• Select ‘Start upgrade’ and Magic TV™ will begin the upgrade process
and show progress bars for any downloading or installing process
• Caution: it is important that the power to Magic TV™ is not interrupted
during the upgrade process
Finish: Once the firmware has been upgraded, Magic TV™ will
restart automatically.
If Magic TV™ finds new firmware online it will always upgrade to that
instead of any USB firmware. If you want to force Magic TV™ to ignore
online firmware you must temporarily disconnect if from the internet.
Automatic upgrade Over-The-Air (OTA)
Occasionally, Magic TV™ may broadcast new firmware Over-The-Air (OTA).
If this happens, you will be given a prompt to proceed with the upgrade in
exactly the same way as the Internet upgrade process (see previous page).
9
System Operations
75
74
10.1
Common Problems
78
10.2
Setting the Output Format from the Front Panel
80
10
Troubleshooting