500 D 01/2012
1a
1. Photometer NANOCOLOR
®
500 D
The
NANOCOLOR
®
500 D is not only a high-performance photometer, it also
features versatile software capabilities. With its large reserves of light at all wave-
lengths, the user can perform precise measurements, even at high extinctions.
Storage of all
NANOCOLOR
®
analytical methods and multilingual user guidance
facilitate measurement. Additional programmes such as measurement of extinction,
kinetics, data networks, etc. expand the applicability beyond the
NANOCOLOR
®
analytical system as an instrument which can be used in all types of application in
the laboratory.
Additional features are: processing of non-linear curves, storage of measurement
results, warning for values outside the measuring range, sample identification, pos
-
sibility of programming the user's own analytical procedures, clear readings and
user guidance via graphic display, etc.
1.1 Technical data
Technical data
Single beam filter photometer for a wavelength range from 340 to 860 nm
Silicon photo-element
Automatic zero adjustment
Graphic display 128 x 64 pixels
Foil-covered keys with tactile feedback
Cuvettes: rectangular cuvettes 10, 20 and 50 mm
round glass tubes 16 mm OD
Photometric accuracy: ± 1 %
Long-term stability: < 0.002 E/h
Power requirements: 9 V, max. 1 A
Power consumption: max. 9 VA at maximum charging current
Data interfaces: bidirectional RS 232 C interface
Universal Serial Bus USB 1.1
Dimensions: 227 x 282 x 105 mm
Weight: 2.4 kg
This appliance complies with the following EC Directives:
– 73/23/EEC of 02.19.1973 – Low Voltage Directive
– 89/336/EEC of 05.03.1989 (including Amendment Directive 92/31/EEC)
– EMV Directive
Disposal in accordance with EU directive 2002/96/EC
In compliance with EU directive 2002/96/EC, MACHEREY-NAGEL
will accept back and dispose of the old instrument at no cost.
ATTENTION!
It is not allowed to dispose of the instrument using mu-
nicipal waste disposal services. Please talk to your local
MACHEREY-NAGEL contact.