500 D 01/2012
28a
12. Select PROG. UPDATE and confirm with
OK
.
17.11.11 16:06
CONFIGURATION
AUTO-OFF
SYSTEM-RESET
PROG. UPDATE
filter 11/12
→
CONFIGURATION
PROG. UPDATE
back
17.11.11 16:06
→
In order to perform a programme update, you must first install the up
-
date software and the new programme file (
www.mn-net.com
) on a computer.
Before you start the update procedure the photometer has to be connected to
the computer either via the serial or the USB interface. Start the update pro-
gramme on the PC and on the photometer. After a successful update the pho-
tometer returns to the method selection mode.
MACHEREY-NAGEL
BIOS SP-A5 V1.1
MACHEREY-NAGEL
* UPDATE *
UPDATE
_ _ _
13. Select display and confirm with
OK
.
17.11.11 16:06
CONFIGURATION
AUTO-OFF
SYSTEM-RESET
PROG. UPDATE
Display brightness
→
17.11.11 16:06
CONFIGURATION
↑
↓
Display brightness
At this point you can use keys
U
/
U
to adjust the luminance of the
display in several steps.
