500 D 01/2012
18a
3.5.3 Memory administration
In the standard mode of operation storage is activated (indicated by a
✔
between
time and battery display.
17.11.11 16:06
✓
0042 AMMONIUM 10
0001 place
8,0 mg/L
NH4
1+0
As long as the cuvette is still in the cuvette slot, pressing key
MEM.
when storage is
deactivated will store the current measuring result, vice versa when storage is
activated pressing key
MEM.
will suppress storage of the current value.
If the display reads <memory full>, you have stored 500 data sets. You can either
accept this message by pressing
OK
and continue measurements without storage,
or you can call up the memory administration by pressing key
MEM.
, transfer the con-
tents of the memory to a computer, e.g. with the data export program, and then clear
the memory of the photometer.
The configuration menu also allows to deactivate storage completely.
Data handling
For memory administration press key
MEM.
in method selection mode.
The display will read either
17.11.11 16:06
MEMORY: 000
or, if any measuring values are stored, e.g.
17.11.11 16:06
MEMORY: 046/046
output ?
✓
The memory administration offers several options for handling data. Using keys
U
/
U
you can select one of the above options.
