35
MBCP33-4
In
more
detail
. . .
DANGER!
Proper maintenance is essential for safe and trouble free operation.
Improper maintenance, or failure to address a problem instantly can cause a
malfunction which can result in serious injury or even death.
1. Keep the machine clean. Remove debris after each use and before storage.
2. Regular and proper cleaning helps to ensure safe operation and prolongs the life
of the machine.
3. Inspect the machine before each use for worn and damaged parts. Do not operate
it if you find broken and worn parts. Replace worn parts as necessary or contact an
authorised service centre for repair before using the machine again.
WARNING!
Only perform repairs and maintenance work according to these
instructions! All other works must be performed by a qualified person!
Cleaning
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive detergents
or disinfectants to clean this machine as they might be harmful to its surfaces.
Cleaning the housing
> Use a damp, lint-free cloth to clean the housing.
> Do not emerge the machine into water or any liquids.
> Clean the ventilation openings (3) on the bottom and at the side cover of the engine
with a soft brush. Clogged ventilation openings (3) might cause the engine to overheat.
> Wipe the surface with a dry cloth afterwards.
Cleaning the cutting attachment
> Disassemble the cutting attachment in reversed order from assembly.
> Use compressed air (max. 3 bar) to remove dirt accumulated on the cutting attachment.
> Use a damp, lint-free cloth to clean the surface.
> Wipe the surface with a dry cloth afterwards.
Care and maintenance
