34
MBCP33-4
In
more
detail
. . .
> Hold the cutting attachment just above the ground at an angle of approximately 30
°
(Fig. 25).
> Move the machine with slow and regular motion from left to right before moving it
back to the starting position and trimming the next area (Fig. 26).
25
26
30
°
> Ensure that the cutting attachment remains clean
and free of off-cuts to avoid jamming. Make sure the
stop switch (15) is set to
STOP
and the spark plug
connector (2) is removed before checking the cutting
attachment for defects.
> Avoid cutting wet grass as it tends to stick to the moving
parts.
> Pay special attention when performing the work close
to trees and bushes (Fig. 27).
After use
1. Stop the engine, disconnect the spark plug connector and let the engine cool down.
2. Check, clean and store the machine as described below.
WARNING!
The cutting attachment continues to rotate for some time
after the engine has been switched off. Wait until the cutting attachment
comes to a complete stop before setting the machine on the ground.
The golden rules for care
WARN
ING! Always stop the engine, disconnect the spark plug connector (2)
and let the engine cool down before performing inspection, maintenance and
cleaning work.
27
Operation / Care and maintenance
