SERVICE DOCUMENTATION, MAINTENANCE & ERRORS
35
Error:
Display remains dark or keeps flashing
Symptom Turn bike on, display keeps dark
Bike
Erzberg PED & S-PED, Brose-Motor, Brose Allround Display
Step 1:
Restart
-Turn bike off ( ON/OFF-Button > 2 sec.)
-Turn bike on ( ON/OFF-Button < 1 sec.)
Step 2:
Remove battery
check LEDs by pressing ON/OFF-Button on the battery no LED? --> charge battery
LEDs flashing? --> restart battery
OFF: press ON/OFF-Button until LEDs turn off one after another
ON: press ON/OFF-Button until LEDs start flashing on again
Step 3:
Battery locked and fixed without play?
Are your bottle holder screws too long and touching the Battery?
Battery Running temperature:
-10 – +50 °C
Step 4:
Check wires & plugs for correct connection and intactness of:
- Display (at handlebar clamp)
- Taillight (at Seat-tube)
- Front light & horn – Speed sensort
- Speed sensor
- Battery wiring harness
- Battery contacts
Step 5:
Dry and clean the battery connector on the frame and battery side: Compressed Air
and/or hair dryer
Step 6:
Replace the Display
Step 7:
Replace the harness
Step 8:
Replace the motor
Содержание M1-ERZBERG Pedelec
Страница 33: ...SERVICE DOCUMENTATION MAINTENANCE ERRORS 33 ...