MAINTENANCE, CARE AND TRANSPORT
22
TRANSPORTING THE BIKE
The e-bike may generally only be transported with the battery removed!
The Pedalec may be transported inside or outside of the vehicle. The front wheel can
be removed and likewise, if necessary, the handlebars can also be removed. Be
especially careful not to damage any electronic wiring or mechanical cables. Observe
the maximum clamping forces for roof or rear rack mounting. This can lead to damage
to the frame if not carefully observed.
Please note the manufacturer's specifications for the maximum load of the bike
carrier! (Recommended: Thule adapter no.: 982003)
S-PEDELEC SEAT POST DISASSEMBLY
To disassemble the seat post of your S-Pedelec, you need to unplug the connector
in the cable to the rear light. Make sure that the plug has a fuse. Likewise, you need
to unhook the seat post cable. This is made possible when you push the seat post all
the way into the frame.
For the subsequent assembly, please note that the connector for the rear light has a
predetermined plug-in direction. The connector locks when plugged together. The
rear light, brake light as well as license plate light are active again when the system is
switched on. When mounting, make sure that the minimum insertion/maximum ex-
tension depth (indicated on the seat post) is observed.
INFO
Always use the included brake locks when removing a wheel from the
e-bike.
INFO
If you disassemble components on your e-bike, make sure that you
use the correct torque when reassembling them!
(see chapter Torques)
Содержание M1-ERZBERG Pedelec
Страница 33: ...SERVICE DOCUMENTATION MAINTENANCE ERRORS 33 ...