SAFETY INFORMATION
7
THE FIRST RIDE
Familiarise yourself with your new M1 bike before your first ride. Pay attention to
the position of the brake levers and their assignment to the front or rear wheel. The
factory setting is for the rear brake to be operated with the right brake lever, while
the left lever brakes the front wheel. Get used to the brakes first at low speed. Always
increase gradually from the lowest assist level. Get familiar with the riding character-
istics, motor operation and gear shifting of your M1 bike away from traffic. Adjust
your saddle to a position that is comfortable for you. Practice using the walk-assist.
Your Erzberg is equipped with disc brakes which must first be bedded in. To do this,
you need about 30 short braking operations, in which you should brake from approx-
imately 25 km/h to a standstill. Be sure to use the brakes in a controlled manner to
prevent them from locking-up. After the bedding in process, the brakes should be
applied evenly & equally using smooth and consistent brake lever pressure.
The 10 most important facts about your M1 Bike
1.
ON: press briefly (<1 sec.), OFF: press long (> 2 sec.)
2.
Brake system: 30x from approx. 25km/h to standstill
3.
Battery must always engage with a clearly audible click
4.
Never wash with high pressure cleaner
5.
Drive assists only with min. 50W & 10Nm pedal force
6.
Too high/low cadence leads to power loss
7.
Always start with lower gears (minimising wear)
8.
Transmission: Reduce pedaling force during gear shifting
9.
Apply load to front and rear brakes equally
10.
Maximum range only after at least 2-5x full charge cycles (reserve-100%)
Содержание M1-ERZBERG Pedelec
Страница 33: ...SERVICE DOCUMENTATION MAINTENANCE ERRORS 33 ...
