M1-Sporttechnik M1-ERZBERG Pedelec, Руководство пользователя

Страница: 14 / 40

FUNCTIONS OF THE BIKE
14
RIDING WITHOUT BATTERY
Riding the bike is also possible without the battery. In this case, however, you will not
have a speedometer display. This is also the case if you have ridden the battery to
100% empty.
HINWEIS
If the battery is removed from the e-bike or the battery is completely
discharged, the light will not illuminate. The system automatically
switches off pedal assistance when the reserve is reached (approx. 2%)
in order to continue to supply the lighting system for a limited period of
time. If the e-bike does not have a functioning light system, it no longer
complies with the Road Traffic Licensing Regulations (StVZO) and may
therefore not be used on public paths or roads.
HINWEIS
If the battery is removed from the e-bike, dirt and water can penetrate
the frame and cause damage. M1 advises against use without the bat-
tery.
INFORMATION & ADVICE ON THE BATTERY AND CHARGING PROCESS
Please read the safety instructions carefully for the battery and charging process
before charging!
Lithium-ion batteries do not have a memory effect. Therefore, you can recharge the
battery at any time without affecting the charging capacity. The charger can remain
connected to the battery for an unlimited time without any problems. However, we
ask you to disconnect the battery from the mains supply after it has been fully
charged in order to save valuable resources. The charging process may also be in-
terrupted at any time.
The battery reaches its maximum service life when it is charged at an ambient tem-
perature of b5° C and +30° C and stored at b10° C and +20° C.
INFO
Ambient temperatures below +10° C and above +30° C can affect the
range.
INFO
If the battery is removed from the e-bike, dirt and water can penetrate
the frame and cause damage. M1 advises against use without the bat-
tery.
INFO
If necessary, remove dirt from the charging socket or charging plug with
a clean dry cloth.
INFO
Allow the battery to cool down after long or demanding rides before
starting the charging process.
INFO
The charger may generate heat during charging. If the charger gener-
ates excessive heat, the charging process should be paused and the
charger should be disconnected from the mains supply.