5
is monitored for false jamming alarms for at least weeks prior to leaving the jamming detection
function permanently enabled.
Battery Monitoring
All devices powered by non-rechargeable batteries incorporate a battery level monitoring feature
which will warn of a low battery status. The batteries on any device indicating a low battery status
should be replaced immediately.
System House Code
In order to prevent any unauthorised attempt to operate or disarm your system, you must configure
your system to accept radio signals only from your own system devices. This is done by setting a
series of 8 DIP switches in all devices to the same ON/OFF combination (the House Code) selected
by the user/installer.
ON
ECE
1
2
3
4
5
6
7
8
e.g.
Switch
= set to ON
position
The House Code is set up by moving each of the 8 DIP switches in each device to the same randomly
selected ON/OFF sequence. When setting the DIP switches, ensure that each switch ‘clicks’ fully into
position. Use the tip of a ballpoint pen or a small screwdriver to move each switch in turn.
All devices must be configured with the same House Code in order for the system to operate
correctly.
IMPORTANT:
It is important that the system House Code is always changed to a code other than
the factory setting and that all devices are configured with the same House Code in order for the
system to operate correctly.
