www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | [email protected]
Lumishore USA 7137 24TH Court East Sarasota, Florida 34243 | (941) 405-3302 | [email protected]
Initial Light Setup
The Initial Light Setup tells the controller what position the lights are installed on the vessel so that they can be sent
information in the correct order and color change in the correct sequence.
Setting up the lights with their correct position ensures modes such as “Color Sweep” and “Scenes” function correctly.
Set up is very straightforward and will only take a short amount of time. Once setup is complete the system will memorise
the light positions so this process only needs to be carried out once.
To set up the lights use the following steps and the example positions shown below. The diagrams show typical positions
of installed lights for three scenarios.
NOTE: In each installation, Position number 1 should be the furthest light forward on the Starboard side.
Note at each stage how each light will be numbered in accordance with these schematics.
Position 1
Position 1
Position 2
Position 3
Position 9
Position 6
Position 4
Position 5
Position 3
Position 1
Position 2
Position 5
Position 8
Position 7
Example positions transom only
Example positions for 5 lights
7
