User Manual of Digital Video Recorder
135
5)
Click “Request Domain” to see if the address is available. If not, try another address.
6)
Entering DDNS. Once the DDNS address is created, it can be entered into the NVR/DVR. The
DDNS settings are under:
7)
Menu > Configuration > Network > DDNS
Figure 9. 15
Configure DDNS in DVR/NVR
8)
Click “Test” to make sure the information has been entered correctly.
Note:
Click the check box next to
Enable.
Device Domain Name
is the address just created.
User Name
is the installer‟s e-mail address.
Password
is for the DDNS account created.
Confirm
is the DDNS password again.
The password is not the e-mail account password. The default DDNS type is “LTS” and the default
server is “ns1.dvrlists.com” (our server). Leave this information alone.
5.
Click the
Apply
button to save and exit the interface.
9.2.2
Configuring PPPoE Settings
Purpose:
The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Enter the
Network Settings
interface.
Menu > Configuration > Network
2.
Select the
PPPoE
tab to enter the PPPoE Settings interface.
Figure 9. 16
PPPoE Settings Interface
©2015 LT Security, Inc. All Rights Reserved. White papers, data sheets, quick start guides, and/or user manuals
are for reference only and may or may not be entirely up to date or accurate based upon the version or models.
Product names mentioned herein may be the unregistered and/or registered trademarks of their respective owners.
