PROGRAMMING A REMOTE EXPANDER
After remote expander
’
s settings have been modified, follow this procedure to complete the modification with its appropriate programming
action:
The
Select by Expander
and the
Select by Loop Address
options permit you to select a specific network device (central node included).
You will use one of the following two windows to select a specific expander:
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Expander Settings
[Expander Settings]
View/Edit Expander
[View/Edit Expander]
Select by Expander
Select by Loop Address
Select by Expander
The required network device is searched through its sequential number (1 to 16).
Select by Loop Address
The required network device is searched through its intelligent loop address.
If [Legacy mode] is NOT activated, the
FI750/RF/WE
have
their own loop address; therefore,
Select by Loop Address
can be used to fetch them. On the other hand, if [Legacy
mode] is activated, only the
FI750/RF/W2W
device can be
fetched using
Select by Loop Address
.
Select expander
Expander:2
MGGG0001 Children: 0
Select loop address
Address: 2
MGGG0001 Children: 0
[View/Edit Expander]
Program Expander
Please enter password
0002
..Writing config..
To scroll through the expand-
ers, use the Up and Down keys.
Use Enter to select the required one.
PROGRAM REQUIRED
PROGRAM REQUIRED
Program success
press back button
10