REPLACING A DEVICE
-
THROUGH LINK BY SWITCH
When you need to replace a device:
After having selected the virtual child device of which you want to replace its real counterpart (
Enter
key):
Select the
Link by switch
option and move the NEW device
’
s switch on the OFF position (or opposite ON, if not indicated):
The child device has been replaced.
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Device Settings
[Device Settings]
Replace Device
[Replace Device]
Select Exp. By Num.
Select by Loop Address
Select Exp. By Num.
You select the network device first through its sequential number (1 to 16).
Successively you will have to look for the specific child device you wish to replace.
Select expander
Expander:1
MGGG0000 Children: 1
Select exp 1 device
Address: 1
Detector
N0GG0000
Select by Loop Address
The required child device is searched through its intelligent loop address.
Select loop address
Address: 2
Detector
N0GG0000
To scroll through expander and
child devices, use the Up and
Down keys.
To scroll through the child
devices, use the Up and Down
keys.
[Link device]
Link by switch
Wakeup link
Linking: 01 : 01
Move device switch
to off position
Press back to abort
Linking: 01 : 01
...
Press back to abort
Linking: 01 : 01
Link success
Press back to exit
Different UUID
The use of the child device
’
s switch, its power on and
troubleshooting procedures are explained on the child
device
’
s manual.
Please enter password
0002
17
