REPLACING A DEVICE
-
THROUGH WAKEUP LINK
When you need to replace a device:
After having selected the virtual child device of which you want to replace its real counterpart (
Enter
key):
Select the
Wakeup link
option and make sure that the child device you intend to link through
“
wakeup mode
”
is powered up, unlinked, reset
and its switch set in
“
wakeup
”
position (OFF or opposite the ON position).
This window requires you to insert the unique identification (UUID) of the NEW device (use the
Up
,
Down
,
Left
and
Right
keys).
Enter
key when done.
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Device Settings
[Device Settings]
Replace Device
[Replace Device]
Select Exp. By Num.
Select by Loop Address
Select Exp. By Num.
You select the network device first through its sequential number (1 to 16).
Successively you will have to look for the specific child device you wish to replace.
Select expander
Expander:1
MGGG0000 Children: 1
Select exp 1 device
Address: 1
Detector
N0GG0000
Select by Loop Address
The required child device is searched through its intelligent loop address.
Select loop address
Address: 2
Detector
N0GG0000
To scroll through expander and
child devices, use the Up and
Down keys.
To scroll through the child
devices, use the Up and Down
keys.
[Link device]
Link by switch
Wakeup link
[Wakeup link]
N0GG0001
Insert new UUID
Please enter password
0002
18
