LINKING A REAL DEVICE
-
WAKEUP LINK
A child device is made part of the Taurus system only through the linking operation.
After one or more virtual child devices have been added, perform the following procedure:
1)
Be sure that the child device or all the child devices you intend to link through
“
wakeup mode
”
are all powered up, unlinked, reset and their
switch set in
“
wakeup
”
position (OFF or opposite the ON position).
2)
Virtual child devices must have the unique identifier code inserted.
3)
Perform the following procedure on the keyboard
-
display system:
After having selected the virtual child device (or one of the virtual child devices) of which you want to link its real counterpart (
Enter
key):
Select the
Wakeup link
option.
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Device Settings
[Device Settings]
Link Device
[Link Device]
Select Exp. By Num.
Select by Loop Address
Select Exp. By Num.
You select the network device first through its sequential number (1 to 16).
Successively you will have to look for the specific child device you wish to link.
Select expander
Expander:1
MGGG0000 Children: 1
Select exp 1 device
Address: 1
Detector
TO LINK
N0GG0000
[Link device]
Link by switch
Wakeup link
The use of the child device
’
s switch, its power on and
troubleshooting procedures are explained on the child
device
’
s manual.
Select by Loop Address
The required child device is searched through its intelligent loop address.
Select loop address
Address: 2
Detector
TO LINK
N0GG0000
To scroll through expander and
child devices, use the Up and
Down keys.
To scroll through the child
devices, use the Up and Down
keys.
CHILDREN TO LINK
14