LINKING A REAL DEVICE
-
LINK BY SWITCH
A child device is made part of the Taurus system only through the linking operation.
After a virtual child device has been added, perform the following procedure:
After having selected the virtual child device of which you want to link its real counterpart (
Enter
key):
Select the
Link by switch
option and move the device
’
s switch on the OFF position (or opposite ON, if not indicated):
The child device is now part of the system.
Sys: 037
N: 09/45
F: 55/25
TM
-
W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Device Settings
[Device Settings]
Link Device
[Link Device]
Select Exp. By Num.
Select by Loop Address
Select Exp. By Num.
You select the network device first through its sequential number (1 to 16).
Successively you will have to look for the specific child device you wish to link.
Select expander
Expander:1
MGGG0000 Children: 1
Select exp 1 device
Address: 1
Detector
CHILDREN TO LINK
TO LINK
00000000
[Link device]
Link by switch
Wakeup link
Linking: 01 : 01
Move device switch
to off position
Press back to abort
Linking: 01 : 01
...
Press back to abort
Linking: 01 : 01
Link success
Press back to exit
The use of the child device
’
s switch, its power on and
troubleshooting procedures are explained on the child
device
’
s manual.
Select by Loop Address
The required child device is searched through its intelligent loop address.
Select loop address
Address: 2
Detector
TO LINK
00000000
To scroll through expander and
child devices, use the Up and
Down keys.
To scroll through the child
devices, use the Up and Down
keys.
13
