LST FI750/RF/W2W, Руководство пользователя

Страница: 21 / 31

LINKING A REAL EXPANDER - AUTOLEARN / DISCOVERY
Second and last step for adding a
FI750/RF/WE
is the “ Autolearn / discovery ” operation.
The real device (or devices) will be effectively linked to the system:
The last window requests you to select the wireless channel that will be used for this “ Autolearn / discovery ” operation.
You can select channel A, B or C.
Use the less congested one. If channel A gives problems then use channel B; if channel B gives problems then use channel C.
It is suggested you use the survey kit for Taurus systems (
FI750/RF/MK
) to find out which of the three channels is freer.
The “ discovery channel ” you set here must be the same “ discovery channel ” you set on the other
FI750/RF/WE
devices.
Made the “ discovery channel ” selection press Enter :
It is suggested to select Yes that requires mandatorily a backup route for the wireless messages to and from every single
FI750/RF/WE
and the
central node. Press Enter .
You are now requested to set all involved
FI750/RF/WE
in “ Discovery mode ”; refer to
FI750/RF/WE
’ s interface guide for this procedure.
Set all involved
FI750/RF/WE
s in “ Discovery mode ”.
Press Enter .
Sys: 037
N: 09/45
F: 55/25 TM - W2W
Please enter password
0001
[Main Menu]
System Config
[System Config]
Expander Settings
[Expander Settings]
Network AutoLearn
Select the channel:
A
The “ discovery channel ” you
set here must be the same
“ discovery channel ” you set on
the other
FI750/RF/WE
devices.
Is network 2nd path
Yes no
discovery required?
Ensure every expander
start discovery
is in discovery mode,
then press select to
Set all involved
FI750/RF/WE
s in
“ Discovery mode ”.
Please enter password
0002
21