Gen VI Dimmer
User Manual
Page 26
5.8.3.1
Manually Setting Loss Memory Channel Levels
The “DMX Loss Memory” menu (above) shows the first 6 channels. Use the
<
or
>
buttons to see
the other groups of 6 channels. The navigator at the top right of the screen shows current group of
6 selected channels highlighted.
Touch a channel to select it. You can select multiple channels. To select a range of channels, select
your first channel then press
Thru
then your last channel. Use
All
to select all channels. Press
None
to de-select all channels. When you have selected your channel(s) press
Level
.
Use the keypad to set the level then press
Apply
.
5.8.3.2
Taking a Snapshot
To create a memory by taking a snapshot, press
Snap
from the “DMX Loss Memory” menu above.
•
Pressing
DMX
will take a snapshot of the current DMX input signal
•
Pressing
Outputs
will take a snapshot of the current output of the GEN·VI. These channel
levels could be coming from DMX or Riggers Control or a combination of both
When you take the snap, the channels levels will be displayed in the box.
To save the snapshot to the memory press
Apply
.
The channels levels that were captured in the snapshot can be edited by manually setting channel
levels as described above.
5.8.3.3
Fade Time
When editing the DMX Loss memory (above), you can set a fade (in/out) time for the memory by
pressing
Fade
.
Channel levels in
the snapshot