Gen VI Dimmer
User Manual
Page 25
To create or edit a “DMX Loss Memory” press
Config
,
DMX
.
The “DMX Loss Memory” pane has 3 buttons,
•
Press
to create or edit the memory as described below
•
Press
Delay
to set the time that the GenVI will wait after DMX is lost, until its output fades to the
“DMX Loss Memory”
•
Press
Fade In
/
Fade Out
to see the DMX Loss memory on the output (for testing purposes)
The
button shows a bargarph display of the current DMX Loss memory (if any) and also its
fade time in seconds. For example,
When you press
, the “DMX Loss Memory” menu allows you to create or edit the “DMX Loss
Memory” by any of the following methods,
•
Manually set channel levels using the controls on the screen
•
Take a
Snap
(snapshot) of the current DMX input signal
•
Take a
Snap
(snapshot) of the current state of the output
You can also set a fade time for the DMX Loss Memory.
Selects next group
of 6 channels
Navigator shows
current group of 6
selected channels
highlighted
Bargraph of DMX
Loss Memory
channel levels