LSC GEN12/10A Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 49

LSC GEN12/10A Скачать руководство пользователя страница 48

Gen VI Dimmer

User Manual

Page 48

Release: v4.01 Date: 25-May-2021 (for Ti CPU cards only)

•

The Logo and Owner name handling was improved. Messages changed to make user

aware that they need to set name and logo before pushing LOCK. Once LOCK has
been pushed, the name and logo cannot be changed without contacting the factory.
This is for security reasons

All versions below are for NXP CPU only

Release: v1.21 Date: 22-July-2020

•

The Logo and Owner name handling was improved. Messages changed to make user

aware that they need to set name and logo before pushing LOCK. Once LOCK has
been pushed, the name and logo cannot be changed without contacting the factory.
This is for security reasons.

Release: v1.20 Date: 19-June-2020

•

The RDM functionality has been extended to operate with HOUSTON X

•

The owners name and logo security handling has been improved

Release: v1.10 Date: 07-Jun-2018

•

The SD card reader has been revamped so that it can now read exFAT formatted cards

•

The DMX update rate has been increased

•

An upgrade file is now checked for and if present an upgrade button is presented.

Previously the dimmer would reset regardless of whether there was a suitable file on
the SD card or not

Release: v1.05 Date: 29-Apr-2015

•

User confirmation now needed when changing channel configuration from TruPower to

Curve

•

Added quick TruPower/Dimming configuration page

•

Support for 3-channel dimmer variant added

•

Added 'Custom Logo' import from SD Card

•

Added 'Custom Curve' import from SD Card

•

Owner Text is now permanently locked (when set)

•

Implemented Import / Export to SD Card

•

Implemented RDM sub-devices

•

Zero Cross Monitoring added to the Service page

•

Zero Cross limits modification added to the Service page

•

Zero Cross limits adjusted to include 60Hz waveform

Release: v1.03 Date: 01-Jul-2014

•

Added support for 6-channel dimmer variant

•

Non-Dim curve renamed to TruPower (Channel Configuration page)

Release: v1.00 Date: 13-Jan-2014

•

First Public Release

«
...
46
47
48
49
»

Содержание GEN12/10A


















































Отзывы:

Нет отзывов