Gen VI Dimmer
User Manual
Page 6
1
Introduction
1.1
About this Manual
This manual describes the installation, configuration and operation of the GEN·VI range of advanced
dimmer/power systems manufactured by LSC Control Systems:
•
GEN·VI Rackmount
•
GEN·VI Wallmount
There are four different colour themes that you can select on the GEN·VI touch screen. The screen
images in this manual use the default “Gothic” colour theme and a 12-channel model.
1.1.1
Conventions Used in this Manual
Throughout this manual, certain conventions have been used to make the meaning clearer.
•
A word in
Bold
text represents a button on the touch screen
•
Emphasis is indicated by underlining
•
Notes or Hints are displayed in italic fon
t
1.2
Overview
The GEN·VI dimmers can be controlled by any DMX512 lighting controller. Dimmer configuration,
patching and local control is achieved via a backlit colour touch screen on the front panel. A lock
code can be used to prevent unauthorised tampering. Most control functions, configuration options
and front panel operations can also be remotely controlled using the RDM (Remote Device
Management) protocol. System configuration, monitoring and logging is also
possible via LSC’s
HOUSTON X software.
1.2.1
Features
•
DMX512 (1990), DMX512-A (E1-11) and RDM (E1-20) compliant control.
•
If DMX is lost, the GEN·VI
can either hold the last values or fade to a “DMX Loss memory”
after a programmable delay.
•
RCBO (Residual Current Breaker with Overcurrent) per channel. This is a combined overload
circuit breaker with earth leakage (RCD/GFI) protection and Neutral Disconnect function for
each circuit.
•
Individual dimmer channel settings for:
o
DMX address patching.
o
Minimum and maximum output levels.
o
Choice of three fade curves (linear, s, or custom) or LSC TruPower (switched) power
output.
•
LSC TruPower (switched power) provides direct power output by utilising relays guaranteeing
there are absolutely no electronics in the circuit to interfere with connected loads. Ideal for
discharge lamps and LEDs.
•
LSC’s proprietary Current Control Technology © (CCT) protects all RCBO’s from nuisance
tripping due to cold lamp inrush currents.
•
GEN·VI Rackmount has either 10, 16 or 25 amps per channel models with a choice of rear
output connectors.
•
GEN·VI Wallmount has either 10 or 25 amps per channel models with a choice of front output
connectors or internal output terminals.
•
Settable constant fan speed or fully automatic.
•
16 bit internal architecture which gives smooth fades. Essential when dimming LEDs.
•
16 bit DMX control selectable for super smooth fades.
•
Pulse transformers fired dimmers will dim most types of loads. See section 10.
•
100% duty cycle operation across all channels simultaneously.
•
CE and C tick approved.