Gen VI Dimmer
User Manual
Page 20
Touch anywhere within the legend window to close.
5.5
Riggers Control
To set the level of a channel(s) (or run a chaser) from the touch screen, from either home page
(above) press
Riggers Control
.
The output of the Riggers Controls can be turned off or on by pressing:
De activate
/
Activate
. Channels are controlled on a HTP (highest Takes Precedence) basis. If
multiple sources are controlling a channel (such as DMX and Riggers Control) then the highest level
will be output.
To set the level of a channel(s), use the virtual faders or touch a fader then use the
or
buttons.
“TruPower” channels have an On/Off push button switch instead of a fader. The button turns green
when it is on.
Press
<
or
>
to select more channels. When finished press
Exit
.
5.5.1
Chaser
To activate the chaser, from the “Rigger Control” (above), press
Chaser
.
To enable the Chaser, press
Activate
.
Select a pattern using the 6 “Chase Pattern” buttons.
Set the speed in BPM (Beats Per Minute) by pressing the
or
buttons.
Use the “Direction” buttons to select
l>>> l
(forward),
l<<< l
(reverse) or
l< > l
(bounce from end to end).
To disable the Chaser press,
De-Activate
.
When finished press
Exit
.
Output levels.
Channels under
Riggers Control
shown in red
TruPower
(Switch)
channel
Level Up &
down
buttons
Select next
group of
channels