Chapter 2 - Operation
30
2.3.2
Procedure for Setting Data (7-Segment Keypad)
n
In DRV Group:
1.
Rotate the encoder knob until the desired parameter code is displayed.
2.
Press
[PROG/ENT]
key to go into the programming mode, then the display blinks.
3.
Press
[SHIFT/ESC]
key to move the cursor to the desired digit.
4.
Rotate the encoder knob to change the data.
5.
Press
[PROG/ENT]
key to enter the changed data.
n
In FUN1 Group:
1.
Rotate the encoder knob until parameter code ‘20’ is displayed in drive group.
2.
Press
[PROG/ENT]
key to go into the FUN1 group.
3.
Rotate the encoder knob until the desired parameter code is displayed.
4.
Press
[PROG/ENT]
key to go into the programming mode, then the display blinks.
5.
Press
[SHIFT/ESC]
key to move the cursor to the desired digit.
6.
Rotate the encoder knob to change the data.
7.
Press
[PROG/ENT]
key to enter the changed data.
n
In FUN2 Group:
1.
Rotate the encoder knob until parameter code ‘21’ is displayed in drive group.
2.
Go to step 2 of ‘In FUN1 Group’ above, and follow the rest procedure.
n
In I/O Group:
1.
Rotate the encoder knob until parameter code ‘22’ is displayed in drive group.
2.
Go to step 2 of ‘In FUN1 Group’ above, and follow the rest procedure.
Содержание SV008iS5-2
Страница 28: ...Chapter 1 Installation 22 Notes ...
Страница 84: ...Chapter 5 Parameter List 78 Notes ...
Страница 92: ...Chapter 6 Parameter Description DRV 86 Notes ...
Страница 180: ...Chapter 7 Options 174 Type 2 Max 600 Watt Type 3 A ...