Chapter 4 – Quick start procedures
52
4.1
Operating using keypad
1.
Apply AC power.
2.
LCD:
Press
[
▲
]
key three times.
7-Seg:
Rotate the encoder knob until
‘03’ is displayed.
3.
LCD:
Press
[PROG]
key.
7-Seg:
Press
[PROG/ENT]
key.
4.
LCD:
Press
[
▼
]
key one time.
7-Seg:
Rotate the encoder knob left.
5.
LCD:
Press
[PROG]
key.
7-Seg:
Press
[PROG/ENT]
key.
6.
Press
[PROG/ENT]
key.
7.
LCD:
Press
[PROG]
key.
7-Seg:
Press
[PROG/ENT]
key.
8.
LCD:
Press
[SHIFT/ESC]
key and
press
[
▲
]
key to increase the
command frequency.
7-Seg:
Rotate the encoder knob right
to change the command frequency.
The changing digit moves by pressing
the
[
SHIFT/ESC]
key.
9.
LCD:
Press
[ENT]
key to save the
data.
7-Seg:
Press
[PROG/ENT]
key to
save the data.
10.
LCD:
Press
[FWD]
or
[REV]
key to
start motor.
7-Seg:
Press
[RUN]
key to start
motor.
11.
Press
[STOP/RESET]
key to stop
motor.
LCD Display
7-Segment Display
DRV►T/K 0.0 A
00 STP 0.00Hz
DRV► Cmd. freq
00 0.00Hz
DRV► Cmd. freq
00 60.00Hz
DRV►K/K 0.0 A
00 STP 60.00Hz
DRV► Drive mode
03 Fx/Rx-1
DRV► Drive mode
03 Fx/Rx-1
DRV► Drive mode
03 Keypad
DRV► Drive mode
03 Keypad
The PROG/ENT LED turned ON.
The PROG/ENT LED is turned ON.
The DRV LED is ON.
The DRV LED is turned ON.
DRV►K/K 0.0 A
00 STP 0.00Hz
The PROG/ENT LED is turned ON.
The PROG/ENT LED is turned ON.
The FWD or REV LED starts blinking.
The RUN LED starts blinking.
To change the motor running
direction, change DRV 13 to ‘1’.
The STOP/RESET LED starts blinking.
The STOP/RESET LED starts blinking.
Содержание SV008iS5-2
Страница 28: ...Chapter 1 Installation 22 Notes ...
Страница 84: ...Chapter 5 Parameter List 78 Notes ...
Страница 92: ...Chapter 6 Parameter Description DRV 86 Notes ...
Страница 180: ...Chapter 7 Options 174 Type 2 Max 600 Watt Type 3 A ...