LS SV-xxx-iP5A-2, Руководство пользователя

Страница: 3 / 138

Safety Instructions
iii

Equipment is intended for installation in closed electrical operating areas
only
 On User’s Manual it shall be made clear that maintenance adjustments
should be made by qualified personnel.
OPERATING PRECAUTIONS
(1) Handling and installation

The iP5A series inverter can be heavy. Lift according to the weight of the product.
Use a hoist or crane to move and install the iP5A series inverter if necessary. Failure
to do so may result in personal injury or damage to the inverter.

Do not stack the inverter boxes higher than the number recommended.

Install the inverter according to instructions specified in this manual.

Do not open the cover during delivery.

Do not place heavy items on the inverter.

Check that the inverter mounting orientation is correct.

Do not drop the inverter, or subject it to hard impact.

Verify the ground impedance 100ohm or less for 230 V Class inverters and 10ohm or
less for 460V class inverters.

Take protective measures against ESD (Electrostatic Discharge) before touching the
pcb boards during inspection, installation or repair.

The inverter is designed for use under the following environmental conditions :
Environ
ment
Ambient temp.
- 10 ~ 50
℃
(14
℉
~ 122
℉
)
Decrease 2% of rated current for every 1
℃
increase in above 40
℃
.
Relative humidity 90% Relative Humidity or less (non-condensing)
Storage temp. - 20 ~ 65
℃
(-4
℉
~ 149
℉
)
Location
Protected from corrosive gas, combustible gas, oil
mist or dust (Pollution degree 2 environment)
Altitude, Vibration
Max. 1,000m (3,300ft) above sea level,
Max. 5.9m/sec
2
(0.6G) or less
Atmospheric pressure 70 ~ 106 kPa (20.67 in Hg ~ 31.3 in Hg)
(2) Wiring

Do not connect power factor correction capacitors, surge suppressors, or RFI filter to
the output of the inverter.

The connection orientation of the motor output cables U, V, W will affect the direction
of rotation of the motor. Verify correct wiring before starting inverter.

Incorrect terminal wiring could result in inverter and/or equipment damage.

Reversing the polarity (+/-) of the terminals could damage the inverter.

Only authorized personnel familiar with LS inverter should perform wiring and