LS Industrial Systems XBL-EMTA Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 83

background image

Chapter 8 High Speed Link Service

67

8.3 HS Link Flag

HS link service exchanges between over 2 stations of communication modules. To verify the reliability of read data from
destination station through HS link, HS link service provides HS link information to user.
Communication module provides HS link information synthesizing receiving data by the time every some general interval
And it verifies if the HS link operates in good condition followed by the user’s assigned parameter.

HS link service is composed of followings.
(1)  Run- Link (_HSxRLINK): It shows communication network overall information,
(2)  Overall information of Link-Trouble (_HSxLTRBL)
(3)  _HSxSTATE, _HSxTRX, _HSxMOD, _HSxERR: Individual information. It shows each communication status by 64 registered

item in parameter

User can use upper information in Key word type for programming. And by using HS information monitor function, user
can monitor the status of HS link. Operating many PLCs by using HS link, user should do the operation after verifying the
reliability of Send/Receive data with understanding Run-Link, Link-Trouble, etc. [Table 8-13] shows HS link information
function and definition.

8.3.1 HS link flag classification

Classification

Run-Link

Link-Trouble

Send/Receive

status

Operation

Mode

Error

HS link status

Information

type Overall Overall Individual Individual Individual Individual

Keyword name
(x=HS Link No.)

_HSxRLINK _HSxLTRBL

_HSxTRX[n]
(n=0..64)

_HSxMOD[n]
(n=0..64)

_HSxERR[n]
(n=0..64)

_HSxSTATE[n]
(n=0..64)

Data type

Bit

Bit

Bit-Array

Bit-Array

Bit-Array

Bit-Array

Monitor

availability

Yes Yes Yes Yes Yes Yes

Program

usability

Yes Yes Yes Yes Yes Yes

[Fig. 8-13] HS link flag

8.3.2 HS link flag introduction

(1) Run-Link Flag

Overall information, it shows if HS link operates in good condition by the user’s assigned parameter.
It keeps ‘On’ by the time of permitting ‘Off’ when it is ‘On’ once, and it is ’On’ under following conditions.

(a)    When the permitting link is On’.
(b)    When all parameter registration item setting is normal.
(c)    When every data which is included in parameter registration item Send/Receive as the setting period.
(d)    Status of every setting destination station in parameter is RUN and at the moment there’s no error.

(2) Trouble-Link Flag

(a) It shows if HS link operates in good condition by the user’s assigned parameter.
(b) In the status of ‘On’ of Run-Link, if Run-Link is out of ‘On’ condition, it becomes ‘On’ and it does ‘Off’ when it

recovers.

«
...
66
67
68
69
70
...
»

Содержание XBL-EMTA




















































































Отзывы:

Нет отзывов

Похожие инструкции для XBL-EMTA

Бренд: GBD Страницы: 12

Бренд: Kärcher Страницы: 4

Бренд: Watts Страницы: 12

Бренд: Lancom Страницы: 8

Бренд: YASKAWA Страницы: 121

Бренд: YASKAWA Страницы: 17

Бренд: YASKAWA Страницы: 58

Бренд: YASKAWA Страницы: 30

Бренд: Gardena Страницы: 236

Бренд: hager Страницы: 4

Бренд: Dejero Страницы: 24

Бренд: WINDY NATION Страницы: 16

Бренд: Kaba Mauer Страницы: 10

Бренд: Xantech Страницы: 7

Бренд: Chamberlain Страницы: 1

Бренд: ICP DAS USA Страницы: 4

InRAX MVI46-PDPS

Бренд: ProSoft Technology Страницы: 72

Бренд: K+R Performance Engineering Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды