Chapter 8 High Speed Link Service
63
(2) Setting HS link sending block
[Fig. 8-4] Setting HS link Sending Block station type and mode
(a) Set station type ‘MASTER’ as the left screen of [Fig. 8-4].
(b) Select mode ‘Send’ as the right screen of [Fig. 8-3].
[Fig. 8-5] Setting HS link sending block station no. and block no.
(c) When an user selects sending as the left screen of [Fig. 8-5], it sets setting station no. in basic parameter.
(d) Input block no. as the right screen of [Fig. 8-5].
[Fig. 8-6] Finishing HS link sending block data size setting
Select station type
Select ‘Send’
Station no.
Input block no.
Input Read area
Input data size
