LS Industrial Systems LGRF-H, Руководство пользователя

Страница: 56 / 70

56/70
“LS Ubiquitous RF-ID System”
5 Flags 03 ISO 15693 Flag value
6 Command 21 Set 21 of Write Single Block Command among ISO 15693
Commands.
7 Baddr 00 Marks the Address of relevant Block to perform Writing.
As writing is done to zero Block here, set Baddr as ‘00’.
8~11 Bdata 31~34 Marks the data to write to zero Block(4 Bytes). (Hex).
12 Check Sum ED Calculate Check Sum value and mark the low 8 bit value.
z
Receiving Frame Structure (normal receiving)
No. Items Value Description
1 Start Byte F0 Byte indicating the start of Receiving Frame (set as F0)
2 Station ID 00 Station no. given to Reader (the value of rotary switch next to
Reader is shown.)
3 Data Length 06 Total length of Frame (from Start Byte to Check Sum)
4 Control Mode 03 Control Mode selected from Sending Frame is displayed.
5 Error Code 00 At normal Receiving Frame, ‘00’ (For the value except this,
refer to Error Code. Appendix B)
6 Check Sum F9 Calculate Check Sum value and mark the low 8 bit value.