manualshive.com logo in svg

Lowrance HDS Gen3 Touch, Руководство оператора

Поделиться
Скачать
Lowrance HDS Gen3 Touch Скачать руководство пользователя страница 138

Icon

Description

Surface observation

   

Tropical storm tracking; past (grey) - present (red)
- future (yellow)

   

Hurricane (category 1-5) tracking; past (grey) -
present (red) - future (yellow)

   

Tropical disturbance/depression tracking; past
(grey) - present (red) - future (yellow)

   

Storm attributes

Lightning

 

Watch box location and warning

Marine zone location

Marine zones

Sirius™ service includes access to weather reports for all U.S. Marine
Zones, with the exception of the high seas zones.
You can setup the system to read the forecast for a selected area.
Select the selected zone, and use the menu to confirm your
selection.

Tropical statements

You can read tropical statements including information about
tropical weather conditions. These statements are available for the
entire Atlantic and the Eastern Pacific.

138

SiriusXM™

 | HDS Gen3 Operator Manual

Содержание HDS Gen3 Touch







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды