Lorex LH030 ECO BLACKBOX3 SERIES, Инструкция по эксплуатации

Страница: 155 / 172

DDNS Setup (Advanced) 25
5. Configure the following:
00
00
1
2
3
4
5
E XAMPLE
5.1. Under Login Type , select IP Login .
5.2. Under IP Address , enter the DVR’s IP Address (e.g. 192.168.0.100 ).
5.3. Under User Name , enter the DVR’s user name (default: admin ).
5.4. Under Password , enter the DVR’s password (default: 000000 ).
5.5. Under Client Port , enter the DVR’s Client Port (default: 9000 ).
6. Click Login .
• If this is the first time connecting to your system, you will be prompted to change the
password. Enter a new 6 character password and click OK .
• Enter the new password in the login screen and click Login to connect to the DVR.
25.2 DDNS Setup—Access your DVR Remotely over the Internet
Setting up DDNS connectivity allows you to view your DVR from any computer or compati-
ble mobile device with Internet access.
Note
Except where noted, the instructions below are the same for PC and Mac.
To set up remote connectivity with your DVR, you must:
1. Port forward the HTTP and Client ports (default: 80 and 9000 ) on your router to your
DVR’s IP address.
2. Create a DDNS account.
3. Enable DDNS on the DVR.
4. Test the remote connection by entering your DDNS address in a web browser.
25.2.1 Step 1 of 4: Port Forwarding
You must port forward the HTTP and Client ports (default: 80 and 9000 ) on your router to
your DVR’s IP address before you can remotely connect to your system. There are several
methods to port forward your router:
#LX400008; r. 2.0/12067/12067; en-US
145