Camera
Power on/off
Vehicle DVR
Camera
Displayer
(optional)
2 Channel H.264 FULL HD 1080P
Mobile DVR for Motorcycle
Quick User Manual
Attention
H12AE58G00
● CAM1 indication light: as red light,
if light off, no cameras detected.
If light in flashing, it starts recording. In rapid flashing as triggered
for recording instant events.
● CAM2 indication light: as red light,
if light off, no cameras detected.
If light in flashing, it starts recording. In rapid flashing as triggered
for recording instant events.
● WiFi indication light: as blue light.
Light off as no WiFi dongle detected.
Light on as connecting to WiFi.
● REC indicator: as Red light.
Light off as 1 CH or 2 CH camera undetected.
In flashing as in recording. In rapid flashing, as events trigger recording.
● WiFi indicator: as blue light.
Light off as WiFi dongle undetected.
Light on as connecting to WiFi.
Device boots after power on and wait approx. 20-30 sec. Red light will constantly
bright after power on, and then system starts to record when REC red light
is flashing.
For ensure recording system working correctly, please play and
check storage files on PC regularly.
Installation on motorcycle ( For example)
Appearance
Light signal
Viewer
*Notes:
(A) To do this, the software should be installed DirectX 9.0 or above.
(B) Support OS: WINDOWS 7,8,10, does not support MAC OS
(C) The recommended hardware requirements: i3 above grade 2.7GHZ,
RAM: 4G or more, more preferably independent display card
Installation diagram
DVR installation diagram
2. Shut off/Stop recording
The DVR will keep recording 3 seconds after power off, at this point, system will
write the buffer back to Micro SD card. In addition, after all light turn off, user can
remove Micro SD card and get all video files from it.
1. Boot / Recording
CAM1
CAM2
Close
Minimal
Playback
Calendar
Backup
Snapshot
Configuration
Format
G-Sensor
Compass
Google Map / File list
Speed display
Play speed
Play speed
Operation control
interface
Volume control
WiFi Connection
VACRON MOTO
for IOS
VACRON MOTO
for android
Method 1: Connect DVR with
battery, and then sets ON/OFF
switch. The DVR use independent
power supply.
Method 2: DVR connect with
motorcycle power supply (ACC ON),
the DVR will be activated when
motorcycle engine is on.
Red cable： DC cable
Black cable： Ground cable
2CH
DVR
2CH DVR
Full HD Camera
DC
10V~15.6V
-20~55°C
super-
capacitor
DC5V
car cam
1/2.7” CMOS
LENS
3.3 mm
110
˚
Full
HD
Full
HD
OBD (On-board display unit)
MIC
optional
optional
Micro
※Memory card is excluded, please purchase it separately.
Standard Set:
1. Camera*2
2. Camera extended cable 2 meter*1pc + 1 meter*1pc
3. Power cable
4. USB WIF dongle
5. Velcro
6. Quick guide manual
Product Accessories
Optional:
1. 8/16/32G/64G/128G Class10 above Micro SD card
2. OBD (On-board Display unit)
DVR
Full HD camera
DVR host
OBD (optional)
DVR cables
Micro SD card insert
Record
WiFi
Microphone receiver
Host Indicator
Display signal indicator
Method 1
Method 2
ACC ON/OFF
OBD
(On-board display unit)
(optional)
WIFI
CAM2
CAM1
1
2
1
4
5
(1)OBD cable connector
(2)WiFi dongle connector
(3)Camera 1 cable connector
(4)Camera 2 cable connector
(5)Power cable connector
