25
Using the Setup Menu
Password Change
Use Hard Disk Setup to change your system
password (by default,
111111
).
Figure 16.2 Password Change screen
To change your system password:
1. From the Hard Disk Setup menu, select
Password Change
and press
.
2. Enter your current password.
Note:
Enter your new
6-character
password
. Select
Shift
to view uppercase
characters and symbols.
3. Re-enter your new
6-character password
to confirm. The password screen closes
and returns you to the System menu.
4. Press
until the Exit menu appears.
Select
Save & Exit
and press
to
save your settings.
ATTENTION
: You
must
save your
settings from the Exit menu for your new
password to take effect.
Time Set
You should always set the date and time when
first starting up the system. For details on
setting the time, see “Setting the Date and
Time” on page 12.
Event List
You can access the Event List from the System
menu. For more details on using the Event List,
see “Event List” on page 17.
Loss Alarm
Enable/disable the buzzer when a camera is
disconnected.
To enable/disable the loss alarm:
1. From the System menu, select
Loss
Alarm
and press
to select On/Off.
Note:
If
On
, a short buzzer will sound if a
camera is disconnected; the loss icon will
also appear in the top-right corner of the
affected channel. If
Off
, the buzzer will not
sound, but the loss icon will appear in the
top-right corner of the affected channel.
F/W Upgrade
Firmware upgrades can provide improved
functionality to your system. You can download
these free upgrades from
www.lorexcctv.com
Note:
You must disable recording on the
system prior to updating the firmware.
Figure 16.3 Firmware upgrade screen
To upgrade firmware:
1. Download the update from
www.lorexcctv.com
to your PC. The
firmware carries the file extension,
.FWI