21
Using the Setup Menu
Record
Set record speed, quality, record schedule and
recording duration for triggered events.
Figure 12.0 Record Menu
To configure record settings:
1. From the Setup Menu, select
Record
and
press
. The Record menu opens.
2. Select the following options and press
to configure settings:
• Record Speed
:
Select channels 1~4 and press
to
set the frames per second (FPS) for
each channel. NTSC: by default, 15 fps;
max. 60 fps. PAL: by default, 12 fps,
max. 50 fps.
Figure 12.1 Record Speed menu
• Record Quality
:
Set as
Normal
,
High
, or
Highest
.
• Event Rec Duration
:
Event Record Duration is the length of
time the system will record when motion
is detected on a selected camera. Set
from
5
,
10
,
15
,
20
,
25
, or
30
seconds (by
default, 10 seconds).
• Record Schedule
:
Press
to select each hour from
0~23. Press
to set the record
method (
Red
=Time/Continuous
Recording,
Green
=Motion Recording,
Grey
=No recording).
Note:
In order to use Manual Recording,
you must apply "No Recording" to a selected
hour block in the record Schedule.
Figure 12.2 Record Schedule
3. Press
until the Exit menu appears.
Select
Save & Exit
and press
to
save your settings.
