13
Recording
Recording
By default, the system is set to immediately record video from connected cameras in continuous
Time Record Mode.
The system automatically records and saves events in 4-hour blocks. Active recording is indicated
by the red Record Icon in the top-right corner of each channel.
CH1
2008/11/20 10:32:30
CH3
CH2
Figure 7.0 Recording on all four channels
Motion Recording
You can configure the system to only record when motion is detected on selected cameras.
Motion Recording is indicated by the green Motion Icon in the top-right corner of the channel.
You can configure both Time Recording and Motion Recording in the Record Schedule in the
Setup Menu. See “Record” on page 21.
Manual Recording
Press
/
on the remote control or press
on the front panel to start/stop manual recording
on all four channels.
Note:
"
No Recording
" must be selected in the Record Schedule in order to use manual
recording. See “Record” on page 21.
Recording Audio
The system can record one audio channels. You must have audio enabled cameras or
microphones connected to the system in order to use this function.
