Lorex D861 Series, Руководство пользователя

Страница: 47 / 122

Face Detection 12
7. You can set various events to happen when the alarm is triggered including:
• Show Message: Check to enable an on-screen pop-up when one of your cameras detects a
face. On-screen pop-up shows the channels an event occurred on.
•
Send Email:
Check to enable email alerts. You must configure email alerts before you will
be able to receive them (see 15.7.3 Configuring Email Alerts , page 68).
•
Record Channel:
Select the channels that will record when a face is detected on the se-
lected channel. Set the length of recording following a video loss event in the Post_REC
field.
• PTZ Activation: Set connected PTZ cameras to start a tour, pattern, or go to a preset
location.
• Sequence: Sequence mode will begin. Select the numbered tiles next to this option to in-
clude the corresponding channels in the sequence.
•
Snapshot:
Select the numbered tiles next to this option to save a snapshot of the corre-
sponding channels.
•
Buzzer:
Check to enable the system buzzer.
• Warning Light: Check to enable the system warning light.
8. Click Apply .
9. (OPTIONAL) Click Copy to apply the settings for the current channel to one or more other
channels (see 15.12 Copying Settings to Another Channel , page 89 for full instructions on us-
ing the copy function).
12.2 Configuring Face Recognition
You can configure the system to detect faces and respond with various actions.
To configure face recognition:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu .
#LX400111; r. 5.0/56647/56647; en-US 39